Full Scale test model development

This is a basic sketch model of the earlier design, part of the furniture set (the lazy chair/stool part)
This is the design that could be further developed into a rocker chair/ a play car/ a combined table and chair .etc

The images shows the process of the folds and joints.
1. the template of the full scale side profile is created and the cardboard pieces are cut.
2. the foldable support internal joints are created to measurements to allow proper foldability to be able to flat pack.
3. joints are glued to the main side parts, a limiter support is pasted on the bottom side of the structure to limit the expandibility of the structure to only the specific wideness.
4. the exterior support surfaces were made with the specific profile measurements, this wraps around the top surfaces of the main structure till its sides.
5. the flaps on its sides will then be trimmed and added with a velcro connection to allow easy fixing and removing.

Explaining these images through words is a bit difficult so i will later post the design plan sketch of this model and also a video process of assembling this model.
pro1

pro2